Important Information – Used ECMs

• Tested & Verified: Good, tested used electrical components.

• Programming Required: Must be flashed to your vehicle’s specific VIN by a dealer or qualified diesel shop before installation.

• Programming Not Included: Buyer is responsible for all programming.

• Return Policy: Electrical components that have been opened, installed, or plugged in are generally non-returnable unless covered under warranty.

9C2A-12A650-AEH Used Ford 6.0L Power Stroke Engine Control Module (ECM/PCM)

This used Ford 9C2A-12A650-AEH Engine Control Module (ECM/PCM) is associated with compatible Ford 6.0L Power Stroke V8 turbocharged diesel engine applications.

The ECM, also commonly referred to as a Powertrain Control Module (PCM), manages critical engine functions, including fuel injection commands, engine performance monitoring, sensor communication, diagnostic functions, and operating parameters.

Ford 6.0L Power Stroke diesel engines were used in E-Series commercial vans, cutaway chassis, and Super Duty trucks. These platforms are especially relevant to school transportation fleets operating Type A school buses and other commercial passenger vehicles.

A tested used Ford ECM provides a cost-effective replacement option for a malfunctioning engine computer, helping transportation departments, fleet maintenance teams, and diesel repair facilities reduce repair expenses while extending the service life of existing vehicles.

This ECM requires programming to the receiving vehicle’s specific VIN and correct engine calibration before installation. Programming must be performed by a dealer or qualified diesel repair facility equipped with appropriate Ford diagnostic and programming equipment.

Important Compatibility Note: Ford used multiple PCM hardware configurations and calibrations across the 6.0L Power Stroke engine family. Matching the engine displacement alone does not guarantee compatibility. Verify the original PCM engineering number, Ford service number, vehicle VIN, and engine configuration before purchasing.

Part Specifications

Primary Engineering Part Number: 9C2A-12A650-AEH
Manufacturer: Ford Motor Company
Component Type: Engine Control Module (ECM) / Powertrain Control Module (PCM)
Condition: Used – Testing status to be confirmed
Engine Manufacturer: Ford / International-Navistar
Engine Model: 6.0L Power Stroke
Engine Displacement: 6.0 Liters
Engine Configuration: V8 Turbocharged Diesel
Fuel Type: Diesel
Primary Vehicle Platform: Ford E-Series – Subject to VIN Verification
Programming Required: Yes – VIN/Calibration-Specific
Programming Included: No
Stock Number: 10E-9C2A12A650-STK

Common Applications

Potential vehicle applications include:

• Ford E-350 Super Duty vans equipped with compatible 6.0L Power Stroke engines

• Ford E-450 Super Duty cutaway chassis equipped with compatible 6.0L Power Stroke engines

• Type A school buses built on compatible Ford E-Series diesel chassis

• Ford E-Series shuttle buses and commercial passenger vehicles

Important: These are vehicle platforms associated with the engine family, not confirmed direct fitments for 9C2A-12A650-AEH. Match the original PCM engineering number and vehicle VIN before purchasing.

OEM # 9C2A-12A650-AEH, 9C2A12A650AEH, 9C2A 12A650 AEH, DPU-475 & DPU-475T, FD-F36A (PCM 122), AEU7